I haven't been in UK waters since the pandemic, but am planning a little trip to the Shetland Islands from Norway this summer. My boat was...
https://www.cruisersforum.com/forums/f55/propane-butane-in-the-uk-286617.html
Here's my situation. I have a Standard Horizon 2200GX with AIS data out. There are positive and negative wires, yellow and white respectively. ...
https://www.cruisersforum.com/forums/f13/help-with-ais-data-to-garmin-740s-286616.html
I am between a rock and a hard place. My generator has given up the ghost and I need to be able to run my AC water maker. My plan is to us a...
https://www.cruisersforum.com/forums/f10/wiring-30-amp-plug-for-shore-power-286615.html
Something seems missing here! This is an older 2013 206 highfield i just picked up. I know my previous inflatables the or lock was a pin that went...
https://www.cruisersforum.com/forums/f117/highfield-260-oarlock-attachment-286611.html
Hi everybody! I hope I can find some help from here. I bought a sailboat with a beta marine 14 hp engine and last week when I was preparing for...
https://www.cruisersforum.com/forums/f54/beta-marine-14-coolant-leak-is-this-fixable-286610.html
Since there is no room for a shaft anode, I was hoping to add a prop nut anode ... but when I installed the nut, the thread isn't long enough for a...
https://www.cruisersforum.com/forums/f114/no-split-pin-on-prop-nut-286609.html
So our compressor got filled with new gas about half a year ago. I installed a new thermostat. Replaced it electric control unit. Everything should...
https://www.cruisersforum.com/forums/f115/danfoss-bd50-compressor-not-cooling-286608.html
Got a new Hanse last year that came with Sentinel boat monitoring. Very basic, can login and get battery, bilge, and can set a geofence. I so far...
https://www.cruisersforum.com/forums/f13/remote-boat-monitoring-sorry-another-thread-286605.html
Hi everyone, how are you? The local chandlery has a 2nd hand AC that a client gave to him. He’s selling it and I’m considering it as we have two...
https://www.cruisersforum.com/forums/f129/ac-worth-it-286604.html
I have some spots on my engine that I want to touch up with paint. The current color is sort 0f a cream color. Anyone have a paint spec. on this?
On My Spencer 42 the V-berth mattress is toast, I am needing to make a new one, since I am in the yard right now with a clean place to do it, I am...
https://www.cruisersforum.com/forums/f55/sunbrella-or-outdura-for-v-berth-mattress-286602.html
We have chipping and worn off bilge paint that is an Oyster color. Prefer not to touch up with a white or gray paint when the rest of the bilge is...
https://www.cruisersforum.com/forums/f55/bilge-paint-286601.html
I recently anchored in a bay. When I went to raise the anchor, it would get right to the top then release a lot of my chain. after 3 attempt's I...
https://www.cruisersforum.com/forums/f109/cruisers-455-maxwell-anchor-286600.html
I have an engine driven Sea Frost on my sailboat which is in the Caribbean and I'm not right now. Can anyone tell me what the fitting is on the...
https://www.cruisersforum.com/forums/f115/sea-frost-question-286599.html
*How Sailboats Fly* ---Quote--- ”In anticipation of SailGP races in Halifax*, coaches from across Canada are working on their _foiling skills_ in...
https://www.cruisersforum.com/forums/f2/how-sailboats-fly-foiling-286598.html