I need help how to get firmware file for MR-J2S-A Thanks, Mahdi39
I’ve been having an issue with a KOIKE Laser, 2005 model. It has a FANUC 160 series control. It is throwing a 501 alarm due to a V axis over travel....
Hi, I’m new to citizen sliding heads and want to know how to control head 1 and head 2 independently, I know you have to do it with a GOTO macro and...
I am looking for someone that is experienced in design and setting up Shop Sabre /TAP files. I have photos of vehicle grill that I want to...
https://www.cnczone.com/forums/shopsabre/469352-design-project-new-post.html
Hi All. With the aid of some students we are putting together a simple XYZ linear rail CNC using Fluidic control. We were using a hand router as our...
https://www.cnczone.com/forums/spindles-vfd/469351-spindle-voltages-new-post.html
hi i have a b58 controller and am in need of a post processor for vcarve pro and was wondering if anybody could help me. I can controll my machine...
I have recently picked up a mill that was made into a cnc machine with old school Dos program, and a home made controller. The program is quite...
https://www.cnczone.com/forums/drilling-and-milling-machines/469346-upgrading-cnc-mill-new-post.html
Just Wondering How The Service For The Doosan cnc Machines Are, Any Good? Thanks.
https://www.cnczone.com/forums/daewoo-doosan/469344-ellison-technologies-new-post.html
With a regular volt meter (not sure if its suitable to the task for measuring output volts) I've checked the resistance between phases, the...
https://www.cnczone.com/forums/emco-mills/469342-pc-mill-55-slow-spindle-speed-new-post.html
I'm in the process of purging my lube lines to unclog the lines. On my manifold inside the cabinet I have (4) Lines One is the X-Axis One is...
Hello, we received 2 second hand machines DMU 50 ecoline with Sinumerik 810 control (5 axis machine, 3+2) and DMU 50 ecomill with Heidenhain TNC...
Hello. I have a problem whit the toolchange in a MA40HA. It seems like the tool is not unclamped fast enough. The arm sometimes drags the tool out...
https://www.cnczone.com/forums/okuma/469332-tool-unclamp-noise-new-post.html
pendant engrave using a 100 watt mopa fiber laser https://stankern.vids.io/videos/4490d5b6191fe3c8cd/modified-pendant-engrave
https://www.cnczone.com/forums/logic-trace-cnc-dxf/469330-pendant-engrave-new-post.html
traced out this fish design and cut it out on the cnc machine https://stankern.vids.io/videos/7990d5b6191fe0c2f0/final-modified
https://www.cnczone.com/forums/logic-trace-cnc-dxf/469328-2d-fish-cnc-cut-new-post.html
I am new to CNC lathe programming, I understand G50 code to zero, G1 to place the machine in position and M3 to turn the motor, I was wondering if...
https://www.cnczone.com/forums/g-code-programing/469326-cnc-program-new-post.html