Re: Power Converter For Arduino
> As I said in my post, I'm looking for options that would allow me to > tap off 110V input coming into my enclosure. Suggesting a USB > connector ...
http://forums.adafruit.com/viewtopic.php?f=8&p=441315#p441315
> As I said in my post, I'm looking for options that would allow me to > tap off 110V input coming into my enclosure. Suggesting a USB > connector ...
http://forums.adafruit.com/viewtopic.php?f=8&p=441315#p441315
Hello, I've forked the Adafruit Motor Shield V2 Library to Linux C++, here [https://github.com/dwwkelly/Adafruit_Motor_Shield_V2_Library]. My goal is to use this motor shiel...
http://forums.adafruit.com/viewtopic.php?f=31&p=441321#p441321
I know how to power an arduino - As I said in my post, I'm looking for options that would allow me to tap off 110V input coming into my enclosure. Suggesting a USB connector o...
http://forums.adafruit.com/viewtopic.php?f=8&p=441313#p441313
There were 6 male pins soldered on the shield that would plug into the arduino (along with other I/O pins). Since they were shorting, I de-soldered them to see if they were sh...
http://forums.adafruit.com/viewtopic.php?f=31&p=441301#p441301
Is the problem getting the accelerometer calibration status to change, or that the accelerometer measurement values don't change? If the former, it's not broken. The acceler...
http://forums.adafruit.com/viewtopic.php?f=19&p=441300#p441300
I used arduino 1.6.5 program with arduino UNO and 5V 2.5 amp DC power supply performing strandtest on NEOPIXEL RGBW 60 pixels/meter, RGBW 144 Pixels/meter, and LED strip 20 Pi...
http://forums.adafruit.com/viewtopic.php?f=47&p=441286#p441286
Hi People, I am looking for some advice. I am going to custom build my existing Motorcycle Dashboard (2001 Aprilia Falco see pic) and I would like to know what your suggesti...
http://forums.adafruit.com/viewtopic.php?f=25&p=441284#p441284
I'm having a new issue with my Huzzah (in fact I think it may be dead now). Following on from viewtopic.php?f=53&t=87587&p=441233#p441233 [https://forums.adafruit.com/viewtopi...
http://forums.adafruit.com/viewtopic.php?f=53&p=441266#p441266
I'm working on a project where I want to use an arduino to switch some 110V power lines on/off programatically. I've purchased some isolating power relays, so I have what I ne...
http://forums.adafruit.com/viewtopic.php?f=8&p=441252#p441252
You can power the arduino at 5v via the USB port. Any phone charger type suppl will work for that. You can also power it with 7v-12v via the DC input jack. We have a number o...
http://forums.adafruit.com/viewtopic.php?f=8&p=441261#p441261
Hi there! I am brand new to arduino and Adafruit and I purchased the 9-DOF LSM303 accelerometer (https://www.adafruit.com/products/1714 [https://www.adafruit.com/products/1714...
http://forums.adafruit.com/viewtopic.php?f=19&p=441265#p441265
Could you post large (less than 1meg,~800x600), clear, detailed pictures of both sides of your board showing any soldering you have done and the connections to it?
http://forums.adafruit.com/viewtopic.php?f=47&p=441253#p441253