THIS LISTING IS FOR A LIMITED BATCH OF MAPLE NECK BLANKS FOR SOPRANO UKULELE, THAT WERE SENT TO US BY MISTAKE. They are intended for use on a Soprano Ukulele, which has a scale length of arou...
https://www.cbgitty.com/guitar-instrument-parts/clearance-maple-neck-blank-for-soprano-ukulele/
These poplar tenor uke necks are hand-made in the C. B. Gitty workshops in the state of New Hampshire, USA, and we work hard to make sure they are a high-quality product! These are scaled spe...
These chrome sealed gear tuners were designed for soprano ukuleles, offering a change over the traditional friction tuners. The posts on these tuners are shorter than their full-sized counter...
https://www.cbgitty.com/guitar-instrument-parts/4pc-chrome-sealed-gear-soprano-ukulele-tuners-2l-2r/
IMPORTANT NOTE: Many of newer stock for these fretboards have a noticeable bow that may look worse than it is. Our testing has shown that they straighten out to normal during clamping, so it ...
https://www.cbgitty.com/guitar-instrument-parts/rosewood-fretboard-for-soprano-ukulele/
THIS IS A MAHOGANY NECK BLANK FOR A SOPRANO UKULELE. They are intended for use on a Soprano Ukulele, which has a scale length of around 13.7 inches and usually has an overall length of around...
PEOPLE HAVE BEEN ASKING FOR THESE FOR YEARS, AND NOW WE FINALLY HAVE THEM: A SHORTER ROD PIEZO DESIGNED SPECIFICALLY FOR USE WITH 3-STRING CIGAR BOX GUITARS! Each of these ten (10) rod piez...
https://www.cbgitty.com/guitar-instrument-parts/10pc-3-string-rod-piezo-for-cigar-box-guitar/
PEOPLE HAVE BEEN ASKING FOR THESE FOR YEARS, AND NOW WE FINALLY HAVE THEM: A SHORTER ROD PIEZO DESIGNED SPECIFICALLY FOR USE WITH 3-STRING CIGAR BOX GUITARS! These rod piezos have 3 separat...
https://www.cbgitty.com/guitar-instrument-parts/1pc-3-string-rod-piezo-for-cigar-box-guitar/
NO SOLDERING REQUIRED, JUST PLUG AND PLAY! COMPACT SIZE AND MINIMAL MOUNTING PLATE CURVATURE IS IDEAL FOR CIGAR BOX GUITARS.
https://www.cbgitty.com/guitar-instrument-parts/ukulele-cigar-box-guitar-pre-amp-kit-with-2-band-eq/
This is a pack of 6 bone nuts intended for use on concert-scale ukuleles. These nuts have pre-filed string grooves and are ready to install. They are 1.38" (35.1mm) in length, 0.27" (6.9mm) i...
https://www.cbgitty.com/guitar-instrument-parts/6pc-bone-nuts-for-concert-ukulele/
This is a bone nut intended for use on a concert-scale ukulele. These nuts have pre-filed string grooves and are ready to install. They are 1.38" (35.1mm) in length, 0.27" (6.9mm) in height a...
https://www.cbgitty.com/guitar-instrument-parts/1pc-bone-nut-for-concert-ukulele/