HamSphere QSL Exchange Management System PLEASE NOTE!! You can use the HamSphere Logo / Brand / Trademark / Product on your QSL cards providing that the HamSphere logo is put there alone and no...
PLEASE NOTE: ADDED FEATURE TO THE LOG BOOK IS THE QSL CARD MANAGEMENT SYSTEM. Qsl card Management information HAMSPHERE LOG PROGRAM THIS BUILT-IN LOGBOOK – Captures QSO information while u...
If the software gives you an audio device error, please follow this instruction: Type the command /devices in the chat. It will give you a list of available device. Usually the software refuse...
There has been some conversation within the forum concerning the exam and connecting Hamsphere to a radio or repeater. For clarification: The Hamsphere exam does not constitute training, exam...
Hamsphere allows you to store up to 9 different frequencies. If you operate on the same band and frequency often, this feature will come in handy. After you have logged in and Hamsphere is up a...
THE CORRECT WAY TO JOIN IN TO AN ONGOING QSO. While tuning around on the Hamsphere Bands, you may come across an ongoing QSO and maybe you'd like to join in. There is a right way to do this and...
HAMSPHERE CW OPERATION CW Mode Enter CW mode by clicking the DSB/CW button, or by typing /cw in the Chat box. The LED over the CW label will come on. CW OPERATION OVERVIEW When you activa...
OPERATING CW Please limit your CW operation to the lower 25 kHz of any band. Although you'll find most of the Hamsphere CW activity on 40 meters, that probably isn't the best place for CW ope...
CW COMMAND REFERENCE Enter CW Mode: /cw Sidetone Frequency: /offset XXX, where XXX is your sidetone frequency CW Keyboard Speed /speed X, where X is the speed, in words per minute, b...
CW KEYBOARD STORED MACROS Using your "F" Keys to store text Information When you switch to CW mode, the F1 through F8 keys change from the way they behave in DSB mode into keyboard macro keys. ...
USING A KEYER (also see CW Keyboards, Straight Keys, and Paddles) You need to modify your keyer to provide a low-level audio signal output jack that you can connect to your sound card's Line I...
CW KEYBOARDS, STRAIGHT KEYS, AND PADDLES EHOCW , written and published as Windows freeware by Pascal Amesland, F8EHO, is a CW keyboard program that provides output levels compatible with Hamsphe...
The /devices gives you a list of the sound cards that are installed in your computer and, using the related commands /play and /record, lets you independently select the sound card that Hamsphere...
There is no Video regarding this topic because of the various sound cards. Your "devices" will list differently than those listed below. If you have a problem setting your "device's", read the ...
WHAT IS THE DX CLUSTER AND CHAT BOX? On the left side of your transceiver you see a box with the heading Chat/ DX Cluster. This is a very useful display and tool. There are several things we ca...
PING – This command checks your Transceiver connection with the server. When you click on the Hamsphere Icon, on your desktop, the Hamsphere “Radio” will appear. BEFORE YOU LOG IN, type the...
A more detailed instruction on the individual use of the different controls on the Transceiver are posted later in this thread.
/PRIVATE (CALLSIGN) – Using this Command you can send a private message to any other operator on Hamsphere. For example, To send a private message to VE3JAR I would type the following: /priva...
/USERS – Type this Command and the total NUMBR of Hamsphere users will be displayed. /USERS ALL – Type this Command and a LIST of all VISABLE users will be displayed. /USERS BAND – Type...
/LOOKUP (CALLSIGN) – Use this Command to see information regarding any user. For example, to look at the infor mation of operator 195HS123 you would simply type: /lookup 195hs123 – then hit E...
/CHATMODE 0 – This command is the default as far as Chat goes on Hamsphere. When you type a message in the Chat Box, the message can be seen by everyone. Type as often as you'd like but please ...
SET CW MODE – If you like to work some CW here's how it's done. Turn your Hamsphere Transceiver on as usual. Go to the frequency where you want to transmit. Press the DSB/CW button. You will se...
USING THE “F1 THROUGH F12” KEYS IN CW – You can make use of the “F” keys to save you a lot of time and typing. You can “record” various strings of information automatically. When us...
When in the CW Mode we often use some special characters or a combination of characters that have a specific meaning in "CW". 2 of those combination of characters is "AR" and "SK". AR is sent me...