Long story short, the C-Beam Tension XL Linear Actuator assembly instructions call for installing a 3mm spacer in the nut block. View attachment 60653 However, I believe that the correct ins...
Hey folks! Finally got my CNC up and running (custom built with all Open Builds Parts and some 3D printed extras). I am using the Black X32 for a controller. My print area is rather large, so I s...
https://openbuilds.com/threads/cnc-has-unexpected-results-when-printing-first-job.21453/
I am currently trying to build the enclosure in the attached files but i am not sure what parts i need or how to do this. I was hoping someone could give me a parts list for me to purchase the pa...
Continuing to set up the new CNC machine The program stops performing the task at random locations. No errors in the log. The spindle continues to run at the same time. The program cannot be pa...
Unfortunately I had to change a bunch of things at the same time, my control board started playing up so I got a replacement board and then uploaded the latest GRBLHAL firmware onto it. When I la...
https://openbuilds.com/threads/m3-nan-error-when-trying-to-turn-on-plasma.21594/
I've build a cmc plasma table with rack drives of x, y1, and y2 and acme drive of z. I've connected via the interface and been able to jog but sporadically. I, disconnected the interface and been...
https://openbuilds.com/threads/macos-install-drivers-for-silicon-labs-usb-blackbox-x32.21525/
Hi to everyone. I have build a large CNC with y = 3 meters and x = 1.2 meters. I have a measured a backlash on a 10 mm movement after directional change: y=0.6 mm x=0.45 mm I do not real...
https://openbuilds.com/threads/how-much-backlash-is-normal-for-belt-driven-cncs.21586/
I recently purchased the openbuilds motion control x32. Really loved the software, and the plug-play type hardware. I am connecting my existing spindle (DC48V 300W SPINDLE MOTOR - - ) to 24VDC su...
Hello, I am new to all of this so bare with me. Context: I am building a custom machine using the C beam XY gantry in conjunction with a 2x72 belt grinder (mounted horizontally with a contac...
https://openbuilds.com/threads/gcode-radius-issue-g3-using-g91-openbuilds-control.21566/
Hello, Under my basic assumption that my spindle does what it is told to do from gcode, and that the post processor files are machine specific I am asking my question here… I am using a new...
https://openbuilds.com/threads/dwell-in-post-processor.21593/
So I've been using my recent DIY build inspired off the Sphinx design. Quick recap on that is dual leadscrew Y 23's using quad MGN12's. The X axis is using a belt driven 23 on openbuilds C channe...
https://openbuilds.com/threads/pushing-the-machine-limits-spindle-limits-the-bit-or-the-cam.21574/
Hi there, I'm having an issue when cutting circles on my lead 1515. The start/stop point creates a indent regardless of which bit I'm using. All my screws are tight and I haven't seemed to find a...
OpenBuilds published a new build: > LEAD 1010 PLASMA Add-On is a great modification you can do for your > LEAD 1010 to convert it into a metal cutting monster machine! ...
https://openbuilds.com/threads/lead-1010-plasma-add-on.21592/
How to TRAM a CNC Machine: The generic model/vendor-agnostic method to describe the basic principles INTRODUCTION: A CNC machine, can only be as accurate - as it is Built. Therefore, during in...
https://openbuilds.com/threads/tramming-a-generic-guideline.19481/
This is my very first entry in a forum ever. Please bear with me if i've come to the wrong place. I have already searched the forum for solutions to my problem, but have not found one. So far I...
David Bunch published a new build: > Compact Dedicated Rotary Axis Laser Engraver > Click to expand... Read more about this build...
https://openbuilds.com/threads/dedicated-compact-rotary-axis-laser-engraver.18830/
LEAD 1010, Having always so far cut /milled wood I have a project to cut .080 aluminum plate. I used a 1/4" flat end mill and on the conservative side I set up the cut with a roughing pass/finish...
https://openbuilds.com/threads/well-lets-call-today-twisted-tuesday.21588/
Can I attach an optical incremental encoder to the Blackbox X32 to synchronize spindle speed/position with tool movement? Example: Inkrementalencoder PIB408
I am using OpenBuilds Control for the sender to my Invetables Xcrave 1000 Xcontroller. I get the following error message. How do I fix this error?
https://openbuilds.com/threads/probe-not-working-get-error-message.20114/
hello again, i have just received a new blackbox x32 unit today. absolutely nothing has been plugged in since opening this unit other than the usb supplied i have tried installing all drivers...