articles for arduino set

> adafruit_support_rick wrote: >  >>  geostain wrote:ps the potentiometer is connected to A0 3v grd also >>  a bridge from 3v to aref( i also change ...

http://forums.adafruit.com/viewtopic.php?f=25&p=441242#p441242

Thank you so much for the file, I just reflashed the bootloader and my PC was able to detect the board again. I uploaded the blink sketch and it ran successfully. I'm glad I w...

http://forums.adafruit.com/viewtopic.php?f=24&p=441239#p441239

So we found the "arduino Total Control" app for android ATC Lite and like the app so far, but not much information on actually using it with the wifi module and arduino. We h...

http://forums.adafruit.com/viewtopic.php?f=53&p=439282#p439282

Hi, Adafruit! I'm having the same issue with initialization using the FRAM with an arduino Zero (SAMD21 M0+). The good news is that if you ignore the results of getDeviceID an...

http://forums.adafruit.com/viewtopic.php?f=25&p=439252#p439252

I have managed to control the Android phone with 1 sensor. When i trigger the sensor, the Android plays song and when i do it again, the Android stop. But it still has some ...

http://forums.adafruit.com/viewtopic.php?f=53&p=439125#p439125

finally I was able to get by using a Python script and the dronekit library i used the write_byte function instead of the write_byte_data this Python script connects to Mavl...

http://community.emlid.com/t/ardurover-project-i2c-communication-between-rpi2-and-a-arduino-board/1430/4

I recently bought the MG90s micro servo and was attempting to run the built in "sweep" sketch from arduino, however the servo was not operating correctly as it was not rotatin...

http://forums.adafruit.com/viewtopic.php?f=1&p=437510#p437510

sorry, Here is the code Code: Select all [http://forums.adafruit.com/index.php#] | TOGGLE FULL SIZE [http://forums.adafruit.com/index.php#] ///////////////////////////// /*...

http://forums.adafruit.com/viewtopic.php?f=52&p=437503#p437503

Many people have seen the new arduino Zero/M0 Pro and this is a good low power chip. But this only have 1 serial port to connect your serial data devices, Serial1. But I fou...

http://forums.adafruit.com/viewtopic.php?f=25&p=437481#p437481

Hi all- Trying to get a Huzzah ESP8266 to work with the Adafruit micro SD board via the arduino IDE, and am having issues. I see the following noted above: > These are�...

http://forums.adafruit.com/viewtopic.php?f=53&p=436705#p436705

I got the Adafruit microSD card working with a standard arduino UNO. I even got it to work with alternate pins, using the card.init() call with arguments. If I try compiling...

http://forums.adafruit.com/viewtopic.php?f=22&p=436698#p436698

I've always wanted to experiment with an arduino and I finaly came up with a use for one. I have an RC airplane that has a receiver that is integrated with the motor controlle...

http://forums.adafruit.com/viewtopic.php?f=25&p=436691#p436691